Bring your ideas to life with ComposiMold, the remeltable, reusable mold-making material that captures incredible detail and saves you time, money, and reduces waste. Perfect for resin, plaster, wax, soap, chocolate, and more.
Why ComposiMold?
|
Feature |
What It Means for You |
|
Remelt & Reuse |
Get unlimited uses from the same material. Save money and reduce waste. |
|
No Mixing or Measuring |
Simply melt, pour, and go — no complicated ratios. |
|
Professional Results |
Crisp details every time for molds that look pro-made. |
|
Food Contact Safe |
Ideal for culinary, craft, and hobby projects alike. |
|
Fast Setup |
Ready to use in minutes — speed up your workflow. |
|
Beginner Friendly |
Easy enough for first-timers, powerful enough for pros. |
|
Multi-Purpose |
Works with resin, plaster, wax, chocolate, and more. |
How It Works
1. Melt
Heat ComposiMold in the microwave, double boiler, slow cooker, chocolate melter, or wax melter. It’s ready in a minute in the microwave, no mixing, no measuring.
2. Pour
Pour the melted material over your object. It self-levels and naturally releases air bubbles — no vacuum chamber or special tools required. Bubble Buster can be used to reduce surface tension so bubbles don’t adhere to the surface.
3. Cool
Let it cool to room temperature (or pop it in the fridge to speed it up). No long curing times like silicone.
4. Cast & Repeat
Pour your casting material (resin, plaster, chocolate, etc.) into the mold. When you’re ready for a new project, simply remelt ComposiMold and start again.
The Smarter Alternative to Silicone Molds
Unlike traditional two-part silicone, ComposiMold is a plastic-free, endlessly reusable compound.
✔ Zero waste
✔ Lower cost per mold
✔ Faster turnaround
✔ Same pro-level detail
Create More. Spend Less. Waste Nothing.
ComposiMold puts professional-quality mold making at your fingertips — over and over again.
|
Melt Point |
140 F, 65C |
|
Pouring Temperature Range |
130-150F, 54-65C |
|
Storage Temperature |
0-100F, -17-37C |
|
Do not Exceed Temperature |
200F, 93C |
|
Shore Hardness |
Shore A 04 to 07 |
|
Cleaning |
Mild Dish Detergent & Cold water, Dry immediately with paper towel and let sit in open air for 30 minutes. |
|
Mold Releases |
Food Grade Oils (vegetable, corn, coconut, spray oils, olive). For Non-Food use: Petroleum Jelly |
|
Heating Methods |
Microwave, Double Boiler, Hot Water Bath, Candle Wax Melter, Oven. |
|
Volume |
0.7 ounces per cubic inch, or about 1.2 g/cm³ Or 10 pounds of ComposiMold is about 1 gallon. |