Loading... Please wait...
  • Life Casting Molding Powder, 1Lb.
  • Close up of Plaster Cast made in Body Double Molding Powder
  • Plaster Cast made in Body Double Molding Powder
  • Plaster casting of a child's hand holding a seashell.
  • Plaster casting of a child's hand holding a seashell.
  • The short gel time makes it possible to mold and cast with young children.
  • Body Casting Molding Powder is a great sensory learning experience for a child.

1Lb. Body Casting Molding Powder

$14.99
Quantity:

Product Description

  • 2 parts water to 1 part powder by volume.
  • Skin safe material captures very fine detail.
  • 7-10 minute gel time.
  • Good for one reproduction of any body part.
  • Cast plaster, gypsum or fast curing urethane resins.

 

 

One pound of Body Casting Molding Powder when mixed with water will make around 3 average size hands in a container similar to the one shown in the video. 

 

Making a Mould 

  1. Select a container for mixing.
  2. Mix the water and Body Casting Molding Powder (2 parts water to 1 part molding powder by volume). 
  3. Immerse body part into the mixture just before it sets. (6-10 minutes after mixed). When molding areas with hair a thin film of petroleum jelly, skin safe oils, or lotion should be applied to reduce sticking.
  4. Keep the body part still while the mold is setting.
  5. When the mold is set, gently wiggle the body part free and, remove from the mold.

Making the Casting

  1. The mold should be used as soon as possible for casting.
  2. Mix the plaster, gypsum or fast curing urethane according to their directions and then pour into the mold.
  3. Remove the casting from the mold when set. Cut the mold if needed to remove the casting. 

It is unlikely that you will be able to produce more than one casting from each mold. To create more copies mold your casting with ComposiMold or ImPRESSive Putty.

Like anything else start simple it is recommended to gain some experience by first making a reproduction of a hand.

 

 

Videos

Body Casting Molding Powder for Life Casting, Plaster Hand, Family Hand Casting and More 01:46

Mix this Body Casting Molding Powder 1:2 Parts Water, mix, and push your hand in...wait a few minutes and you've made a beautiful mold ready for casting materials such as plaster, concrete, or fast curing resins. Make a perfect duplicate of your hand, foot, ear, and more. It's up to you.

  • Body Casting M...
    Mix this Body Casting Molding Powder 1:2 Parts Water, mix, and...

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!